|
|
Hyperion Manual Micro-Reader 1 |
 |
Hyperion's Micro-Readers are single channel photometers designed to read the absorbance of liquids contained in either 1x8, or1x12 flat bottom microtiter strips as well as test tubes, 12mm to 16mm dia-meter. The instrument optics produce a narrow beam of light which is projected through the well, past the interface filter and on to the photodetector; the measured sample result may then be displayed on the 16 character alphanumeric display in absobance or concentration units. An optional printer/battery pack allows field operation of the instrument as well as direct printout of results. The Micro-Reader with the interchangeable interference filter can be used in the wavelength range of 400 to 700nm.
| |
Technical Specifications
|
Microtiter Strip: | 8-or-12-well
(1x8, 1x12, 2x8, 2x12) |
| Tube: | 12mm and 14mm (Standard)
(other sizes from 12mm to 16mm are available by special order) |
| Min. Read Vol: | 12mm (Round Bottom):.65ml
13mm (Round Bottom):.85ml
14mm (Flat Bottom):1.25 ml
16mm (Round Bottom): 1.25ml |
| Absorbance Range: | 0-2.000 Abs. |
| Accuracy: | ± 2% or.01 Abs.,
Whichever is greater. |
| Precision: | ±1.5% or .005 Abs.,
Whichever is greater. |
| Resolution: | .001 Abs. |
| Detector: | Silicon Photodiode |
| Display: | 16-Character Alphanumeric LCD |
| Power Requirements: | 120 volts ±10%; 60 Hz;10Watts
220 Volts ±10%; 50 Hz;10Watts |
| Interface: | RS232 Connector |
| Dimensions: | 2.25’ (5.7 cm) High
4.0’ (10.2 cm) Wide
5.3’(13.5 cm) Deep |
| Weight: | 1.3 Lbs (.59 kg) |
|
|
